dmesg - ARMv7 rev 2

Return To ARMv7 rev 2 System Information

Booting Linux on physical CPU 0x0
Linux version 3.13.0-rc1-00002-g9568897 (joyx@liyi-HP) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.03 - Linaro GCC 2014.03) ) #1 SMP PREEMPT Tue Apr 15 19:46:15 HKT 2014
CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=30c7387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: Hisilicon D01 Development Board
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
On node 0 totalpages: 4194304
free_area_init_node: node 0, pgdat c04b2fc0, node_mem_map c2500000
  Normal zone: 1520 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 194560 pages, LIFO batch:31
  HighMem zone: 63504 pages used for memmap
  HighMem zone: 3999744 pages, LIFO batch:31
PERCPU: Embedded 5 pages/cpu @d2316000 s6848 r0 d13632 u32768
pcpu-alloc: s6848 r0 d13632 u32768 alloc=8*4096
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 
pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4192784
Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootfstype=ext4 rw earlyprintk ip=192.168.201.39:192.168.201.1:192.168.201.1:255.255.255.0::eth0:on:192.168.0.1:8.8.8.8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 16615616K/16777216K available (3729K kernel code, 150K rwdata, 724K rodata, 174K init, 240K bss, 161600K reserved, 15998976K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffe00000 - 0xfffe0000   (1920 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
      .text : 0xc0008000 - 0xc04616e8   (4454 kB)
      .init : 0xc0462000 - 0xc048dac0   ( 175 kB)
      .data : 0xc048e000 - 0xc04b3aa0   ( 151 kB)
       .bss : 0xc04b3aac - 0xc04efb44   ( 241 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:16 nr_irqs:16 16
sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 85899345900ns
Architected cp15 timer(s) running at 50.00MHz (phys).
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 2748779069440ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
/cpus/cpu@0 missing clock-frequency property
/cpus/cpu@1 missing clock-frequency property
/cpus/cpu@2 missing clock-frequency property
/cpus/cpu@3 missing clock-frequency property
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x1038cef8 - 0x1038cf50
HiP04 MCPM initialized
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
CPU4: Booted secondary processor
CPU4: update cpu_power 1024
CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
CPU5: Booted secondary processor
CPU5: update cpu_power 1024
CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
CPU6: Booted secondary processor
CPU6: update cpu_power 1024
CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
CPU7: Booted secondary processor
CPU7: update cpu_power 1024
CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
CPU8: Booted secondary processor
CPU8: update cpu_power 1024
CPU8: thread -1, cpu 0, socket 2, mpidr 80000200
CPU9: Booted secondary processor
CPU9: update cpu_power 1024
CPU9: thread -1, cpu 1, socket 2, mpidr 80000201
CPU10: Booted secondary processor
CPU10: update cpu_power 1024
CPU10: thread -1, cpu 2, socket 2, mpidr 80000202
CPU11: Booted secondary processor
CPU11: update cpu_power 1024
CPU11: thread -1, cpu 3, socket 2, mpidr 80000203
CPU12: Booted secondary processor
CPU12: update cpu_power 1024
CPU12: thread -1, cpu 0, socket 3, mpidr 80000300
CPU13: Booted secondary processor
CPU13: update cpu_power 1024
CPU13: thread -1, cpu 1, socket 3, mpidr 80000301
CPU14: Booted secondary processor
CPU14: update cpu_power 1024
CPU14: thread -1, cpu 2, socket 3, mpidr 80000302
CPU15: Booted secondary processor
CPU15: update cpu_power 1024
CPU15: thread -1, cpu 3, socket 3, mpidr 80000303
Brought up 16 CPUs
SMP: Total of 16 processors activated.
CPU: All CPU(s) started in HYP mode.
CPU: Virtualization extensions available.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
syscon e28c0000.ppe: regmap [mem 0xe28c0000-0xe28cffff] registered
bio: create slab  at 0
mcss_add_reg_space 0xe28e0000, 65536, mcss serdes1 space
mcss_add_reg_space 0xe28f2000, 4096, mcss serdes0 low space
mcss_add_reg_space 0xe28f3000, 4096, mcss serdes0 hight space
mcss_add_reg_space 0xe28f4000, 4096, mcss ioctrl0 space
mcss_add_reg_space 0xe3e00000, 1048576, mcss sys space
mcss_add_reg_space 0xe8001000, 4096, mcss serdes3 space
mcss_add_reg_space 0xe8002000, 4096, mcss ioctrl1 space
mcss_add_reg_space 0xeb000000, 65536, mcss serdes2 space
mcss_add_reg_space 0xe8000000, 4096, mcss srio space
ulValue = 0x301 == 0x300
SCSI subsystem initialized
libata version 3.00 loaded.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initramfs unpacking failed: junk in compressed archive
Freeing initrd memory: 24576K (c0d00000 - c2500000)
bounce pool size: 64 pages
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
msgmni has been set to 1252
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
e4007000.uart: ttyS0 at MMIO 0xe4007000 (irq = 413, base_baud = 10546875) is a 16550A
console [ttyS0] enabled
bootconsole [earlycon0] disabled
[drm] Initialized drm 1.1.0 20060810
loop: module loaded
ahci ea000000.sata: can't get clock
ahci ea000000.sata: SSS flag set, parallel bus scan disabled
ahci ea000000.sata: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl platform mode
ahci ea000000.sata: flags: ncq sntf stag pm led clo only pmp slum part ccc sxs boh 
scsi0 : ahci_platform
scsi1 : ahci_platform
scsi2 : ahci_platform
scsi3 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x100 irq 404
ata2: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x180 irq 404
ata3: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x200 irq 404
ata4: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x280 irq 404
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD3200BUCT-63TWBY0, 01.01A01, max UDMA/133
ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD3200BUCT-6 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
libphy: hip04_mdio_bus: probed
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
mousedev: PS/2 mouse device common for all mice
TCP: cubic registered
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
/home/joyx/develop/d01/public-workspace/linux-next/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
IP-Config: Complete:
     device=eth0, hwaddr=7a:4c:3f:cf:75:15, ipaddr=192.168.201.39, mask=255.255.255.0, gw=192.168.201.1
     host=192.168.201.39, domain=, nis-domain=(none)
     bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath=
     nameserver0=192.168.0.1, nameserver1=8.8.8.8
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
devtmpfs: mounted
Freeing unused kernel memory: 172K (c0462000 - c048d000)
random: init urandom read with 30 bits of entropy available
init: ureadahead main process (124) terminated with status 5
systemd-udevd[277]: starting version 204
init: gator-daemon main process (285) terminated with status 1
init: failsafe main process (370) killed by TERM signal
init: systemd-logind pre-start process (418) terminated with status 32
random: nonblocking pool is initialized
init: udev-fallback-graphics main process (553) terminated with status 1
init: plymouth main process (145) killed by ABRT signal
init: plymouth-splash main process (595) terminated with status 2
init: mysql main process (658) terminated with status 1
init: mysql main process ended, respawning
init: mysql post-start process (659) terminated with status 1
init: mysql main process (713) terminated with status 1
init: mysql main process ended, respawning
init: mysql post-start process (714) terminated with status 1
init: mysql main process (773) terminated with status 1
init: mysql respawning too fast, stopped
init: plymouth-stop pre-start process (802) terminated with status 1
init: tty1 main process (803) killed by TERM signal

Return To ARMv7 rev 2 System Information